Table of Contents
Advertisement
12.
If you need to remove the WLAN antenna cables, remove the cables from the clips on the left (1) and
right (2) sides of the display rear cover, and then peel the antennas off the inside of the display rear cover
(3). The wireless antennas and cables are available as spare part number M50375-001.
The display rear cover is available as spare part number M51622-001.
To reassemble and replace the display assembly, reverse this procedure.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
Table 5-14
Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page
Spare part number
M50400-001
30).
Power connector cable
55
Advertisement
Table of Contents
