Table of Contents
Advertisement
5.
Remove the touchpad from the computer (3).
To install the touchpad, reverse this procedure.
Fan
To remove the fan, use this procedure and illustration.
Table 5-10
Fan description and part number
Description
Fan for use in models with UMA graphics memory
Fan assembly for use in models with discrete graphics memory
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fan assembly from UMA models:
1.
Remove the three Phillips M2.0 × 4.0 screws (1) that secure the fan to the computer.
2.
Disconnect the fan cable from the system board (2), and then remove the fan from the computer (3).
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
32).
Spare part number
M50402-001
M50438-001
30).
30).
Advertisement
Table of Contents
