Page 1
MADE FROM ALUMINIUM WEIGHT CAPACITY : 300 kg CLASS 1 MEDICAL DEVICE CONFORM TO STANDARD NF EN ISO 10535 : 2007 User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer) v02.12/14...
Step 1 : - You have to find an item in the box. - Your stander is ready for use. User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Page 5
Assembling Instructions User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Batteries status (charge holding) Handcontrol status Inspection carried out on : Inspection carried out by : Date of the next inspection : User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Page 7
THESE CONTROLS CAN BE CARRIED OUT WITHOUT LOAD Periodical Greasing WARNING : DO NOT USE THE DEVICE WITHOUT THE SHIN BLOCK User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
20. If damaged or defective, the Stand-Up Lift should not be used and should not be connected to the direct current. Inform the dealer to remedy the default or failure. User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Minimal Distance Between the Wall and the SCP at its Maximal Height 1300 Maximal Diameter ** SCP : Suspension central point User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
REFERENCES DÉNOMINATIONS FRAME MU-BRS BRAS DE LEVAGE DE MAXXIUP 300 MU-CTB SUPPORT DE CALE TIBIA DE MAXXI UP 300 (SANS MOUSSE D’APPUI SOUS ROTULIEN) MU-MASR MOUSSE D’APPUI SOUS ROTULIEN POUR MAXXIUP 300 MU-RP3F PIED GAUCHE DE MAXXIUP 300 WP-ADAD ANTIDERAPANT ( 1 jeu de 2 pièces droite et gauche)
• Clean the sockets and the commands buttons with a dry cloth, if needed with a wet cloth. • Check the good state of the electric cables. User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
• Loudness : less than 55dB at a distance of 1 meter. • Electromagnetic compatibility : conforms to EN 60601-1-2 Device class II Battery Charging Diagram : User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Page 13
-2 times, Soft stop and soft start unavailable Release button 1 on the handset after cessation of the green LED. User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
The actuator does not work at all 2 . The remote control has to 2 . The remote control is broken down. be changed. User Manual - Stand-Up Lift: MAXXI UP 300 Manufactured by NAUSICAA Médical S.A. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Warranty • Article 1 : NAUSICAA Médical S.A. warrants this product against any defects in manufacturing and assem- bly of mechanical and electronic components. This warranty is for devices used only in accordance with NAUSICAA Médical S.A. terms of use.
Page 16
CONTACT Phone: +33 (0) 466 717 184 Fax: +33 (0) 466 532 305 Email: export@nausicaa-medical.com Website: www.nausicaa-medical.eu Manufactured by NAUSICAA Médical S.A. 12 allée du Piot - ZA Pôle Actif - 30660 GALLARGUES LE MONTUEUX - FRANCE...