Error Messages
Error Message
Paper not aligned with right
guide.
Paper size not detected.
Cause
When paper was loaded, it was not
aligned with the guide on the right
side.
Paper has been loaded askew, or
warped paper has been loaded.
Corrective Action
Follow these steps to reload the sheet.
1.
Press the OK button to clear the error.
2.
Adjust the right edge of the sheet to make it parallel
to the right Paper Alignment Line and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the Paper Retainer .
Follow these steps to reload the roll.
1.
Press the OK button.
2.
Adjust the right edge of the roll to make it parallel to
the right Paper Alignment Line .
3.
If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→
, Loading Rolls in the Printer)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll firmly in
until it touches the Roll Holder flange, and reload the
Roll Holder in the printer.
(→
, Loading Rolls on the Roll Holder)
Follow these steps to reload the sheet.
1.
Press the OK button.
2.
Adjust the right edge of the sheet to make it parallel
to the right Paper Alignment Line and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the Paper Retainer .
3.
If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→
, Loading Sheets in the Printer)
44