Canon imagePROGRAF iPF6350 Basic Guide No.2 Basic Manual page 47

Error Message
Cannot cut paper.
Cannot detect papr
Roll printing is selected.
Cause
There are sheets left on the
Ejection Guide .
There is a foreign object by the
Output Tray , obstructing the
Cutter Unit .
You are not using the printer under
the recommended environmental
conditions for the paper.
You are using paper that is not
compatible with automatic cutting.
In other cases, the Cutter Unit
may be damaged.
The printer could not detect the
paper.
You have attempted to print on a
roll, but no roll is loaded.
Corrective Action
1. Press the OK button and remove the paper.
2. Load paper.
3. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→ , Loading Rolls in the Printer)
1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions, see
the Paper Reference Guide .
(→"Types of Paper," User Manual)
1. Specify Manual as the cutting method and use
scissors or a cutting tool to cut the roll.
(→"Specifying the Cutting Method for Rolls," User
Manual)
For information about paper that is compatible with
automatic cutting, see the Paper Reference Guide .
(→"Types of Paper," User Manual)
2. Press the OK button and remove the paper.
Contact your Canon dealer for assistance.
Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(→ , Loading Sheets in the Printer)
(→ , Loading Rolls in the Printer)
Press ▲ or ▼ to select Load Roll Paper , and then
press the OK button. Load the roll, and then print.
(→ , Loading Rolls on the Roll Holder)
(→ , Loading Rolls in the Printer)
Press ▲ or ▼ and select Stop Printing or press the
Stop button to stop printing.
47
Error Messages