Messages; Event Messages - SMA SUNNY TRIPOWER 8000TL Installation Manual

SMA Solar Technology AG

11 Messages

No display messages if no DC voltage present
Measurements and the display of messages are only possible when there is sufficient
DC voltage (green LED flashing or glowing).

11.1 Event Messages

During an update, the relevant display message is shown in the text line of the display.
Message
< Inst. code valid >
< No new update SDcard >
< Grid param.unchanged >
< Parameters set successfully >
< SD card is read >
< Set parameter >
< Self-test >
< Update completed >
< Update Bluetooth >
< Update display >
< Update main CPU >
< Update communication >
< Update string prot. >
< Update RS485I module >
< Upd. language table >
< Update file OK >
Installation Manual
Description
The SMA Grid Guard code entered is valid.
The configured country data set is now unlocked
and can be changed.
If the configured country data set is protected,
the unlocking is valid for a maximum of
10 feed-in hours.
There is no relevant update file for this
Sunny Tripower on the SD card, or the present
update has already been executed.
The selected switch setting is not programmed or
there is no country data set available on the
SD card.
All parameters of the SD card, e.g. country data
set, have been successfully adopted.
The inverter is currently reading the SD card.
The inverter is configuring the parameters from
the SD card settings.
The inverter is carrying out the self-test.
The inverter has successfully completed the
update.
Update of the Bluetooth component successful.
Update of the display successful.
Update of the inverter component successful.
Update of communication component successful.
Update of electronic string fuse successful.
Update of communication interface successful.
Update of language table successful.
The update file found is valid.
11 Messages
STP8-17TL-IA-en-31 73