Using The Spectrophotometer; Computer Control Instruments - Thermo Scientific Evolution One Series User Manual

Using the Spectrophotometer

Computer Control Instruments

Setting up a Computer Control Instrument
Thermo Scientific
Related Topics
Installing a Smart Accessory
Installing a Manual Accessory
Installing a Liquid Thermostatted Accessory
This section explains how to set up a Computer Control spectrophotometer.
Contents
• Computer Control Instruments
Computer Control instruments must be connected to an external computer with the proper
software installed.
All instrument features can be run from the computer using our Insight Pro software.
Related Topics
Setting up a Computer Control Instrument
Turning off a Computer Control Instrument
Maintenance
To set up a Computer Control instrument
1. Connect the supplied USB cable to the Computer port on the back of the
spectrophotometer.
2. Connect the other end of the cable to the USB port on the back of the computer.
3. Turn on the spectrophotometer main power switch (on the back panel).
4. If the main power switch is already on, turn off the spectrophotometer main
power switch.
Wait for the system to initialize. This may take several minutes. The status light pipe
stops blinking when initialization is complete.
Note If the instrument fails to initialize, the power indicator blinks rapidly. Contact us.
2
Evolution One Series Spectrophotometers
Using the Spectrophotometer
Evolution One Series Spectrophotometer User Guide 23