Performing Infrared Communication - Canon PIXMA MP500 User Manual

Setting Items
(1) Select the page size for the wireless print.
(2) Select the media type for the wireless print.
Note
(3) Corrects the contours and smoothes out the jaggedness.
Image optimizer ON, Image optimizer OFF
(4) Select the layout of the photos as below.
Sticker print:
Stickers x 16
Printing on paper other than sticker:
Bordered x 1, x 2, x 4, x 8
Borderless x 1, x 2, x 4, x 8
Mixed 1, 2, 3
Note
Page Size
Sticker

Performing Infrared Communication

You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1
Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page
(2) Load paper.
See "Loading Paper" on page
(3) Ensure that the proper paper source is selected.
See "Changing the Paper Source" on page
2
Set the print setting.
See "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone" on
page 70.
3
Start Infrared Communication.
Chapter 5
(1)
(2)
(3)
(4)
For information on wireless print compatible page size and type, see
"Recommended Paper and Requirements" on page
<Mixed 1>, <Mixed 2>, or <Mixed 3> can be selected only when the
page size setting is <8.5" x 11" (215 x 279)> or <A4>.
When printing on Canon Photo Stickers, make the settings as below.
Media Type
Photo Paper Plus Glossy
21.
Printing Photographs from a Wireless Communication Device
Layout
Stickers x 16
19.
25.
21.
71