Printing Photographs Directly From A Canon Bubble Jet Direct Compatible Digital Camera - Canon PIXMA MP500 User Manual

Note
About "Image optimize"
When the "Default" (selection based on the machine setting) is selected, the machine operates
based on the tab 2 of the print setting specified in Memory card mode of this machine. For the
setting items, see
If you use a Canon PictBridge compatible device, you can select "VIVID", "NR", "VIVID+NR", or
"Face". (Note that these options cannot be selected for some models.)
Note
About "Date/File No. print"
You cannot change this setting on this machine. Selections of this setting will be based on that of
the PictBridge compliant device.
If you select an image which has had the shooting date embedded in it using a camera with the
print mode, select "Off" for this function. If you select "Date", "File No.", or "Both", the date and/or
file number will be printed over the embedded date.
Note
Printing Photographs Directly from a Canon Bubble
Jet Direct Compatible Digital Camera
The following is a list of media types that can be set on the Canon Bubble Jet Direct compatible
digital camera or digital video camcorder (PictBridge incompatible) along with their limitations when
connected to this machine.
Chapter 4
When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
1. Select the Auto Sheet Feeder as the paper source.
For detailes, see
Feeder" on page
Always load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select 10 x 15 cm / 4" x 6" for the "Page size", and "Photo" for the
"Media type".
3. Select N-up for layout, then select 16-up.
Some PictBridge compliant devices display the Layout option; 2-up, 4-
up, 9-up, and 16-up. In this case always select 16-up. If there are no
options on the PictBridge compliant device that correspond to 2-up, 4-
up, 9-up, or 16-up, printing on stickers is not possible.
When you using Photo Stickers (PS-101), do not set "Borderless" in
"Layout" settings.
"Memory card mode" on page
When "VIVID" is selected, green and blue portions of photos are
printed vividly.
When "NR" (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are
performed.
When "Face" is selected, backlit images are corrected when printed.
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the device and machine,
follow the instructions given in the device's instruction manual.
Controls of the device cannot be used for the following:
– Print quality setting
– Machine maintenance
Printing Photographs Directly from a Compliant Device
"Loading the Print Media in the Auto Sheet
25.
37.
67