Canon PIXMA MP500 User Manual page 48

Procedure:
(1) Display the Special copy screen.
See "Special Copy" on page
(2) Use [ ] or [
(3) Use [ ] or [ ] to select <Auto layout> or <Manual layout>.
If you selected <Auto layout> and pressed [OK], go to step (7).
If you selected <Manual layout> and pressed [OK], go to step (4).
(4) Use [ ] or [ ] to set the vertical repeats.
(5) Press [
(6) Use [ ] or [ ] to set the horizontal repeats, then press [OK].
(7) Specify the necessary items.
See "To Change Print Settings" on page
(8) Press [Color] for color copying, or [Black] for black & white copying.
Important
Note
Copying with Fade Restoration (Fade-restored copy)
This function helps to correct the color when copying documents that have faded over time.
1
Prepare for copying.
See "Prepare for copying." on page
2
Select the copy menu.
(1) Press [Menu].
(2) Use [ ] or [
(3) Use [ ] or [
3
Start copying.
(1) Follow the on-screen instructions to load the document on the Platen Glass, then press
[OK].
(2) Specify the necessary items.
See "To Change Print Settings" on page
(3) Press [Color] to start copying.
46 Copying
41.
] to select <Image repeat>, then press [OK].
] to move the cursor to the right.
The area read from the documents depends on the enlargement/
reduction ratio.
The size of the documents to copy should be no larger than one
division of the paper. For example, if you copy four documents at the
same size, their sizes must be one-fourth of the page size or smaller.
<Credit card> cannot be selected for the page size.
<Fit-to-page> cannot be selected for <Magnification>.
] to select <Special copy>, then press [OK].
] to select <Fade-restored copy>, then press [OK].
35.
39.
35.
Chapter 2