Table of Contents
Advertisement
ENGLISH
Temperature
11
When you select a washing programme, the
appliance automatically proposes a default
temperature. With this option you can
change the temperature.
The indicator
= cold water.
Daily use
Warning! Read the safety
booklet.
Before the very first use, pour 2
litres of water into the detergent
compartment marked by
Pour 2 litres of water into the
detergent compartment marked
by
. Pour a small quantity of
detergent into the compartment
marked by
programme for cotton at the
highest temperature without any
laundry in the drum. This
removes all possible dirt from the
drum and the tub.
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
3. Load the laundry.
4. Pour the detergent and other treatments
in the proper compartment of the
detergent dispenser.
5. Push the
button to switch the
appliance on.
6. Turn the programme dial to set the
desired programme.
Hints and tips
• Sort the laundry as follows: white,
coloured, synthetics, delicates and wool.
• Follow the washing instructions on the
laundry care labels.
•
.
. Set and start a
To download the full version visit www.ikea.com
Acoustic signals
This appliance has different acoustic signals.
To activate/deactivate some of the acoustic
signals when the programme is completed,
touch the
and the
simultaneously for about 2 seconds. The
display shows On or Off.
7. Set the desired options by means of the
corresponding touch buttons. The
relevant indicator comes on.
8. To start the programme, touch the
button.
9. The appliance starts or, if you have set
the
option, the countdown starts.
When programme starts, thanks to the
AutoAjust System, the appliance
automatically adjusts - in 30 seconds -
the programme duration to the load to
achieve perfect washing results in the
minimum possible time.
10. At the end of the programme, remove
the laundry. If you set an option that
ends with water in the tub, drain the
water to unlock the drum.
11. Push the
button to switch the
appliance off.
12. Close the water tap.
The Stand-by function may
automatically deactivates the
appliance to reduce the energy
consumption. Press the
to activate the appliance again.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Turn multilayered fabrics, wool and items
with printed illustrations inside out.
• Pre-treat tough stains. With adequate pre-
treatment, stains and limited soiling can
buttons
button
9
Advertisement
Table of Contents
