MSI MS-7846 Manual page 28

▶ DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto]
[Link]
[UnLink]
▶ Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in "DRAM Timing Mode". User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶ Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto]
[Enabled]
[Disabled]
▶ DRAM Voltage [Auto]
Sets the value for appointed voltage related to memory. If set to "Auto", BIOS will set
the voltage automatically or you can set it manually.
▶ CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled]
[Disabled]
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key
features does the installed CPU support. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time
by pressing [F5].
Downloaded from
DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
Allows user to configure the DRAM timing manually for all memory
channel.
Allows user to configure the DRAM timing manually for respective
memory channel.
This setting will be configured automatically by BIOS.
Memory will completely imitate the archive of first initiation and
first training. After that, the memory will not be initialed and trained
when booting to accelerate the system booting time.
The memory will be initialed and trained every booting.
The system will issue a warning message during boot and than
needs to load the default settings for new devices.
Disables this function and keeps the current BIOS settings.
ManualsNet.com
28
search engine