Table of Contents
Advertisement
3 TECHNICAL MAINTENANCE OF THE PRODUCT AND ITS COMPONENTS
3.1 Safety measures
After putting into operation it is recommended to inspect the device periodically in order
to control:
− operability;
− compliance with the operating conditions;
− battery charge level;
− absence of external damages to component device parts.
When working with a charger connected to the 220-volt system at 50 Hz, the
requirements set out in the "Safety rules for the operation of electrical installations of
consumers" are mandatory.
To work with the device are allowed those who have been instructed and certified for
certain qualification group for safety in working with electro-radio measuring devices.
3.2 Warranty
The following warranty information is valid for all NOVOTEST products.
The manufacturer guarantees the conformity of the device to the requirements of the
technical conditions under the user's compliance with the conditions of transportation,
storage and operation, and timely maintenance at the manufacturer's premises at least once a
year.
3.3 Duties of the owner
The Instruction Manual contains information on the correct use and maintenance of your
instrument.
Correct use and maintenance of the instrument will help you avoid costly repairs caused
by incorrect operation, neglect or improper maintenance. In addition, following our
recommendations will increase the service life of the device.
− In the event of a defect or malfunction, return your device to the manufacturer or
an authorized dealer as soon as possible for warranty repairs. This will help
minimize the repairs required to your appliance.
− Clean the casing of the product regularly according to the recommendations.
− Observe the conditions of use and storage of products in accordance with the
recommendations.
Advertisement
Table of Contents
