Table of Contents
Advertisement
1.4 Parts
The design of the device includes an electronic unit with a vibration sensor connected to the
lower end surface of the device (Fig. 1.1). The control keys are located on the front panel,
which also houses the LCD.
1
1 - vibration sensor; 2 - Vibration Meter Pen body; 3 - "Modes" key; 4 - LCD display;
1.5 Marking and sealing
The manufacturer's logo is applied to the front panel of the device.
Its serial number is printed on the back panel.
1.6 Packing
The device is delivered in a packing container to prevent damage during transportation.
2
3
5 - key for switching on and measuring.
Fig 1.1 – Vibration Meter Pen NVS P1
4
5
Advertisement
Table of Contents
