Table of Contents
Advertisement
2
Press the
If you are using an externally mounted flash, please refer to
its manual for setting instructions.
3
Focus the camera on the subject on which
you wish to lock the exposure setting.
4
Press the shutter button halfway.
5
Press the
The flash fires a pre-flash and the exposure is fixed.
6
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock: Operate a button other than the control
dial.
The FE lock function is not available when [Flash Adjust] is
set to [Manual] (p. 72).
Auto Exposure Bracketing (AEB Mode)
Shooting Mode
In this mode, the camera automatically changes the exposure
within a set range to take three shots as the same interval as
continuous shooting (p. 44) after you press the shutter button once.
The images are shot in the following order: Standard exposure,
underexposure and overexposure.
1
FUNC. Menu
* Default setting.
70
button and set it to
button.
*(BKT-Off)
See Menus and Settings (p. 24).
(flash on).
(AEB)
.
Hide quick links:
Advertisement
Table of Contents
