Checking For Focus Right After Shooting - Canon PowerShot G7 User Guide Advanced User Manual

Checking for Focus Right After Shooting

Shooting Mode
You can check whether the image is in focus right after it is recorded.
1
Shoot.
The recorded image displays for about 2 seconds (or the
interval set with the Review feature (p. 27)).
2
Press
displayed.
The number of times the DISPLAY
button is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISPLAY
button repeatedly until the screen at
the right appears.
Displays as follows.
- Camera is focused: AF frame for
the image that has been shot
displays in white, and an orange frame appears within the
focused frame.
- Camera is not focused: image that has been shot displays,
and an orange frame displays at the center of the image.
Contents of the orange frame can be confirmed at the
bottom right. Zoom can be used (p. 89).
You can switch between AF frames and change the display
position (p. 47) using the MENU button or the
button.
To Cancel Checking the Focus:
Press the shutter button halfway.
You can delete an image by pressing the
the image is displayed (See Basic Guide p. 19).
Pressing the DISPLAY button will change the display on the
LCD monitor as follows.
46
Focus Confirmation
(or ) while the image is
Detailed
Recorded Image
Orange frame contents
,
button while
Standard
, or