Acorp 4845GVQ Manual page 44

Chapter 2
USB 2.0 Controller
If USB Controller is enabled, use this item to enable or disable
USB 2.0 controller.
The Choices: Enabled (default); Disabled
USB Keyboard Support
If USB Controller is enabled, use this item to enable or disable
the USB Keyboard Support.
The Choices: Enabled (default); Disabled
AC97 Audio / Modem
Use this item to enable/disable the AC97 Audio/Modem.
The Choices: Auto(Automatically enabled); Disabled
VT6105 LAN Chip
Use this item to enable/disable the onboard VT6105 LAN chip.
The Choices: Enabled; Disabled
Init Display First
Use this item to enable or disable the onboard USB controller.
The Choices: PCI Slot; Onboard(default)
Onboard AC'97 Codec
Use this item to enable or disable the onboard AC'97 Codec.
The Choices: Enabled(default); Disabled
IDE HDD Block Mode
If your IDE HDD supports block mode select, enabled is for
automatic detection of the optimal number of block read/write
per sector the drive can support..
The Choices: Enabled(default); Disabled
Onboard FDC Controller
The choices: Enabled (default) Disbled
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choices: Auto; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4; 2E8/
IRQ3; Disabled.
4845GVQ BIOS Setup
2-44