Operation Keyboard (Optional); Control Knob - Canon Microfilm Scanner 800II Instructions Manual

Before You Begin...
!£ AF (Auto Focus) key
!¢ ZOOM (enlarge/reduce) key
FOCUS key
!§ ROTATE key
!¶ Control knob

Operation Keyboard (optional)

!• Image adjust selection key
!ª Image adjust mode indicators
@º Image adjust control dial
@¡ Rotate key
@™ Film control knob
@£ RESET key
@¢ Paper Select key
Disabled key
CE-IE-323-01 Page 14
Used to automatically focus the image.
Used to enlarge or reduce the size of the image projected
on the screen. Press the ZOOM key and then use the
control knob to enlarge and reduce the image on the screen.
Adjusts the focus of the image projected on the screen.
Press the FOCUS button and then turn the control knob
until the image on the screen is in focus.
Rotates the image projected on the screen. Press the
ROTATE key and then turn the control knob. The image
rotates to match the rotation of the control knob.
Turn this knob to adjust the image after the ZOOM, FO-
CUS or ROTATE key has been pressed.
1
P1 P2 P3 P4
2
24
P 2 P 3 P 4
12
6
8 9 23
7
Selects the image adjustment mode (zoom, focus or rotate).
These indicators show the image adjustment mode selected
using key !•.
After selecting the image adjustment mode, turn this dial to
adjust the image.
Rotates the image 90° clockwise or counterclockwise.
When a motorized carrier is installed, this knob feeds
through the film. Turn the knob to the right to advance the
film and to the left to rewind the film. (Note that this knob
cannot be used with the FS Controller I.)
Restores the default settings for each setting mode.
Selects the paper cassette or multipurpose tray in
ReaderPrinter mode.
Not used by the Microfilm Scanner 800II.
– 14 –
24 3
22
19
18
20
10 21
11
07.5.14, 11:06 Adobe PageMaker 6.5J/PPC