Setting The Scanner; Loading The Film; Adjusting The Image; Rotating The Image - Canon Microfilm Scanner 300 Instruction Manual

I SETTING THE SCANNER I
32

SETTING THE SCANNER

In the Scanner mode, the image projected on the scanner's screen
can be saved by the connected personal computer, or printed out
through a printer connected to the PC. Actual settings and opera-
tions for scanning differ depending on the application you use.
In the DMP mode, the image projected on the scanner's screen
can be printed out through a printer connected to the scanner.
Here below explained are various functions that can be set on the
scanner main unit.

Loading the film

Load the auto carrier with the film you want to view. For details
about the auto carrier installation, see the instructions you received
with the auto carrier.

Adjusting the image

Follow the procedure below to adjust the image on the screen.
Read and perform this procedure correctly to attain a crisp image
on the screen and a clear scanned image.

Rotating the image

To rotate the image to the desired angle, rotate the rotation fin
to the left or right.

Enlarging and reducing image size

To make the image larger or smaller, rotate the zooming fin
the lens to the left or right.

Focusing the image

To focus the image on the screen, rotate the focusing fin
lens to the left or right.
➀
➁
on
➂
on the