Canon FAXPHONE L170 Set-up Basic Manual page 6

Set the fax receive mode.
1 Open the One-Touch Speed Dial
panel.
2 Press [Receive Mode]
3 Press [Receive Mode] repeatedly
until the mode you want appears in
the LCD."FAX ONLY" is the default
setting.
Select from the following:
FAX ONLY:
Answers all calls as fax calls. It receives faxes automatically and disconnects voice calls.
MANUAL:
Rings for every call, whether it is a fax call or a voice call. For a fax call, you have to manually activate
reception of the fax.
AnsMode:
Receives faxes automatically and routes voice calls to the answering machine.
Fax/Tel:
Automatically switches between fax calls and voice calls. Receives faxes automatically and rings for
voice calls.
DRPD:
To distinguish between fax and voice calls by using Distinctive Ring Pattern Detection.
NOTE
• You will need to subscribe to a DRP Service offered by some telephone companies.
➋
4 Press [Set] .
IMPORTANT
• Before sending a fax, you MUST register the fax number, your name, and the current date and
time in the machine. For details, see p. 3-3 of the Basic Guide.
NOTE
• For details on setting fax receive mode, see p. 7-1 of the Basic Guide.
➊
.
➊ ➋