Assemble The Machine - Canon FAXPHONE L170 Set-up Basic Manual

Remove the shipping materials from the machine.
1 Place the machine on a flat surface.
2 Remove all shipping tapes from the exterior of the machine.
3 Open the document feeder tray by flipping it down.
4 Gently open the operation panel by grasping it at the center
and pulling it up.
Remove the protective sheet from the ADF, and close the
operation panel by pressing down until it clicks.
NOTE
• Do not remove the USB label on the back of the machine at this
stage.

Assemble the machine.

5 Insert the output tray
the corresponding slots.
4 Insert the paper cas-
sette into the machine.
D
into
Document
feeder
ADF
tray
1 Insert the tabs of document out-
C
put tray into the slots on the
back of the machine.
2 Attach the extension
F
cover on the back of
the machine.
3 Pull out the paper cas-
sette,
and attach the cassette
extension
sette.
Operation panel
USB label
E
to the cas-