Names And Functions Of Parts - Canon imageFORMULA DR-M140 Reference Manual

0-00-DR-M140_RG_UK.book Page 23 Monday, August 8, 2011 5:15 PM

Names and Functions of Parts

Front View (With the Feed Tray Open)
OPEN Lever
Raise this to open the upper unit.
Document Eject Extension Support
Open this when scanning documents longer than 150 mm in
length.
Document Eject Tray / Upper Unit
Scanned documents are output here.
Open this when cleaning the inside of the scanner or replacing
rollers.
Document Feed Tray
Place the document.
Document Guides
Align the document guides with both edges of the document to
ensure that the document feeds straightly.
Ventilation Holes
These cool the interior of the scanner. Do not block the ventilation
holes, as doing so might cause overheating.
Operating Panel
A range of scanning operations can be performed with this, such
as starting and stopping scans, executing registered jobs, and
cancelling double feed detection. (See p. 24)
Power button
Press this to turn on the scanner. The button remains lit while the
power is on.
Press and hold the button until the light goes out to turn off the
scanner.
The power button lights or flashes as follows depending on the
scanner status.
Power Button Indication Description
Lit Power is on
Flashing Sleep mode
Feed Selection Lever
Use this to change the way documents are fed.
Set the lever to the lower position when scanning documents
consecutively. (See p. 27)
Set the lever to the upper position when scanning documents one
page at a time or scanning multi-page documents that are fastened
together. (See p. 27)
LED Indicator (Orange)
This lights during non separation feeding mode.
23