Canon imageFORMULA DR-M140 Reference Manual page 24

0-00-DR-M140_RG_UK.book Page 24 Monday, August 8, 2011 5:15 PM
Back View
Kensington Slot
Connect an anti-theft key chain or the like.
Straight Path Tray
When using the straight path, scanned documents are output here.
USB Connector
Connect the supplied USB cable to this connector.
Power Connector
Connect the supplied AC adapter to this connector.
Operating Panel
Job No. Indicator
This displays the number of the job selected with the operating
panel, errors, and other information.
24
Job Select Button
This selects registered jobs. Every time the button is pressed, the
Job No. displayed in the Job No. Indicator changes.
DFR (Double Feed Release) Button
This is lit when a document double feed is detected. Pressing this
button cancels the double feed detection function, allowing you to
continue scanning.
Stop Button
This stops active jobs.
Start Button
This executes the job displayed in the Job No. Indicator.
Displayed Error Codes
When a scanning error occurs, the following error codes are displayed
in the Job No. Indicator.
: displayed when the upper unit is open.
: displayed when a paper jam is detected.
: displayed when a double feed is detected while scanning.
: displayed when a skewed document is detected.
: displayed for other errors.
Other Displays
When the straight path tray is opened or closed, the eject method is
displayed in the Job No. Indicator.
: flashes during straight path mode.
: animates during U-turn path mode.