Related Manuals for HDCVT TECHNOLOGY HDC-E5100W
Summary of Contents for HDCVT TECHNOLOGY HDC-E5100W
- Page 1 HDMI Wire le ss Exte nde r with HDMI Wire le ss Exte nde r with O ne - wa y IR (100M) O ne - wa y IR (100M) VER 1.0 VER 1 0...
-
Page 2: Table Of Contents
T ha nk yo u fo r purc ha sing this pro duc t For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surg e pro te c tio n de vic e re c o m m e nde d This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Intro Duc Tio N
1. Intro duc tio n This product is based on H.265 standard solution for transmitting one HD source signal to one HD display. It extends distance up to 330ft/100 meters (In an open environment without Wi-Fi interference) between the encoder and decoder via wireless transmission. -
Page 4: Spe C Ific A Tio Ns
4. Spe c ific a tio ns Technical HDMI Compliance HDMI 1.3 HDCP Compliance HDCP 1.4 Video Bandwidth 6.75Gbps Input: Up to 1920×1080@60Hz Video Resolution Output: Up to 1080P@60Hz Color Space RGB, YCbCr 4:4:4 / 4:2:2 Color Depth 8/10/12-bit Input: LPCM 2.0CH 32KHz/44.1KHz/48KHz/ HDMI Audio Formats 88.2KHz/96KHz/176.4KHz/192KHz Output: LPCM 2.0CH 48KHz... -
Page 5: O Pe Ra Tio N C O Ntro Ls A Nd Func Tio Ns
Storage Temperature -4 - 140°F / -20 - 60°C Relative Humidity 20 - 90% RH (no condensation) Resolution / 1080P60Hz - Cable Length Feet / Meters HDMI IN / OUT 42ft / 15M The use of “Premium High Speed HDMI” cable is highly recommended. 5. -
Page 6: Decoder Panel
5.2 Decoder Panel LINK HDMI OUT DC 5V PAIR SERVICE IR IN Name Function Description Power LED The LED will illuminate red when the decoder is powered on. The LINK LED flashing means that the encoder and decoder LINK LED are transmitting video signals. -
Page 7: Pairing Instruction
5.3 Pairing Instruction Connect the encoder and decoder with an HDMI cable. Power on the decoder firstly, then power on the encoder after the power LED and LINK LED of the decoder are always on. After successful pairing, the LINK LED of the decoder will flash. - Page 8 Connection diagram of using IR cables. Encoder Decoder Note that when the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the DVD remote angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
-
Page 9: Applic A Tio N Exa M Ple
6. Applic a tio n Exa m ple 100M. The transmission distance extends up to Encoder Decoder Power Supply Power Supply DVD or Blu-ray Player 7 / 7...