Advertisement
Quick Links
Advertisement
Related Manuals for HDCVT TECHNOLOGY HBT-E70S
Summary of Contents for HDCVT TECHNOLOGY HBT-E70S
- Page 1 HDMI Extender over Cat5e/Cat6 (HD BaseT) User manual VER: 1.1s...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read the instruction carefully before connecting, operating or adjusting this product. Please keep the manual for future reference. Caution The extender using UTP termination, which follows the standard of direct interconnection method.
- Page 3 Advanced: The extender will start protection mode automatically when using UTP termination, which follows the standard of cross interconnection method.
- Page 4 I. Introduction The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to...
- Page 5 standard HD BaseT signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender.
- Page 6 70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit; 40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit. Support display resolutions up to 4K x 2K@30Hz Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit Transfer Bidirectional Infrared control signal together with the HDMI signal. ※...
- Page 7 Wideband IR Tx --------------------------------------------------------- 2PCS Wideband IR Rx --------------------------------------------------------- 2PCS 24V1A DC Power Supply ---------------------------------------------- 1PC Operation Manual ------------------------------------------------------ 1PC Mounting ears------------------------------------------------------------4PCS IV. Specifications Frequency Bandwidth 297MHz[10.2Gbps] Transmitter Input/Output 1x HDMI Female port/1xCAT6 1x IR Tx/1x IR Rx/1xPhoenix Receiver Input/Output Ports 1xHDMI Female port/1xCAT6 1x IR Tx/1x IR Rx/1xPhoenix Power Supply...
- Page 8 ESD Protection ± 8kV (air-gap discharge) Human Body Model: ± 4kV (contact discharge) Dimensions (mm) 65(W) X 115 (D) X 17 (H) Weight 200g x 2 Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (Non-condensing) Power Consumption (Max)
- Page 9 V. Operation controls and Functions Transmitter POWER: This LED illuminates when the device is connected with power supply. DC 24V: Plug the 24V DC power supply into the unit. HD BaseT OUT: Standard HD BaseT signal output port. Connect HD BaseT...
- Page 10 receiver with a UTP cable following the standard of direct interconnection method. HDMI IN: HDMI input port. This slot is where you connect the HDMI source. IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx. IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
- Page 11 Receiver POWER: This LED illuminates when the device is connected with power supply DC 24V: Plug the 24V DC power supply into the unit. HD BaseT IN: Standard HD BaseT signal input port. Connect HD BaseT transmitter with a UTP cable following the standard of direct interconnection method.
- Page 12 HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable. IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx. IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
- Page 13 POE(Power Over Ethernet) Application Example ※ Description 1...
- Page 14 Bidirectional Infrared control Application Example ※ Description 2...
- Page 15 Bidirectional RS232 control Application Example ※ Description 3...
-
Page 16: Application Example
VI. Application Example...