Connect The Power Cord; Load Paper - Canon MultiPASS MP700 Setup Sheet

Connect the power cord.

IMPORTANT
• Before turning on the power, make sure the document cover A is closed.
1
Plug the power
cord into a socket.

Load paper.

Place a stack of paper (print-side up) in the multi-purpose tray
guide A and adjust to the width of the stack w. Then place the tray cover D over
the multi-purpose tray e.
A
B
NOTE
• Make sure the stack does not exceed the paper limit mark B or tab C. Otherwise a paper
jam may occur.
A
P L E A S E W A I T
Approx. 30 seconds
P U T I N C A R T R I D G E
2
When you connect
the machine, the
Alarm light blinks,
and the messages
above should
appear in the LCD.
w
q
C
ON/OFF(1sec.)
3
If nothing appears in the
LCD, press [ON/OFF (1 sec.)]
to turn on the machine.
• If you need to turn off the
machine, press [ON/OFF (1 sec.)]
for one second.
q. Pinch the paper
e
Turn over to
Turn over to
continue
continue
D