Supplying Power - Panasonic Palmcorder PV-23-K Operating Instructions Manual

Supplying Power

(Battery Pac k )
Charge the Battery Pac k
1
Plug in the AC Adaptor.
POWER CHARGE
2
Power Indicator lights up.
Insert the Battery
Slide the top of the Battery forward, then
press down and release.
The Battery Pack should charge in about
•
1 hour.
POWER CHARGE
0
3
Charge Indicator lights up.
Remove the Battery
(A) Slide Battery forward.
(B) Lift up and out.
POWER CHARGE
0
Charge Indicator goes out when
charging is complete. (About one
hour.)
Note:
After recharging the Battery Pack about 5
times, use the BATTERY REFRESH button
on the AC Adaptor as explained on page 10.
Use the Battery Pac k
1
To Attach the Battery
Align the battery with the top of the mounting
surface and press it firmly into place.
[gill]
2
To Remove the Battery
While sliding the BATTERY RELEASE
button, pull the Battery out and off the
mounting surface.
With a fully charged Battery Pack, you will
•
have about 1 hour of continuous use.
BATIERY
REFRESH
BATIERY
REFRESH
BATIERY
REFRESH
0
9