Copying Your Tapes (Dubbing) - Panasonic Palmcorder PV-23-K Operating Instructions Manual

Before you begin ...
• Turn ON both units.
• Set the recording VCR's Input Signal Selector
to LINE.
• Set the POWER switch on the Palmcorder to
VCR.
Set up and connect the units as illustrated.
•
Connect the AC Adaptor to an AC Outlet.
Connection
TV
(To monitor)
DC Power
C�ble
Copying your Tapes
Recording:
VCR or
Camcorder
To AC Outlet
Main Operation
1
Insert a pre-recorded tape
into the source (Playing) Palmcorder and a
blank tape with record tab into the editing
(recording) unit.
2
�
Press PLAY on the (Playing) Palmcorder.
((�))
3
Press STILL when the tape reaches the
point you want to start dubbing.
Press PLAY and REC together, then
immediately press STILL on the editing
(recording) unit.
STILL
5 ((�JJ
+
Press STILL on the source Palmcorder and
PAUSE/STILL on the editing (recording) unit
to begin copying your tape.
STOP
6 ([!]
+
Press STOP on both units when dubbing
is complete.
Monitor with your
TV
Turn the ON and select its VCR
•
channel (either CH3 or CH4).
• Set the VCR/TV Selector on the recording
VCR to VCR.
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
(dubbing)
OD
·
0
TV
33