Miele DA 2818 Operating And Installation Instructions page 37

Table of Contents

Advertisement

Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
- Lime removers
- Abrasive powders or abrasive liquids
- Aggressive all-purpose cleaners and
degreaser sprays
- Oven sprays
Cleaning the grease filters in a
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a commonly available household
dishwashing detergent.
 In a Miele dishwasher use the
"Normal" program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the grease
filters in any way.
Cleaning and care
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the panel and filters
for cleaning, also clean off any
accessible oil or grease buildup from
the housing. Doing so will prevent a
fire hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
37

Advertisement

Table of Contents
loading

Table of Contents