Advertisement
Quick Links
Product Dimensions
Decorator Wall Hood
DA289-3
Location Codes
E -
110 Volt - 15 Amp 3-wire molded plug
power supply connects through top or
rear of chimney.
O -
Standard 110 Volt Outlet
Notes
• All installations must be done in
accordance with local codes.
• 6" duct connects to blower system inside
chimney.
E
O
Front Perspective
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Advertisement
Related Manuals for Miele DA289-3
Summary of Contents for Miele DA289-3
- Page 1 Product Dimensions Decorator Wall Hood DA289-3 Location Codes 110 Volt - 15 Amp 3-wire molded plug power supply connects through top or rear of chimney. Standard 110 Volt Outlet Notes • All installations must be done in accordance with local codes.
- Page 2 Installation Dimensions Decorator Wall Hoods DA289-3 Structural member Notes • Center unit over cooking surface • Distance "S" is determined by the cooking surface. Minimum distance "S" is: - 14 3/8" for all surfaces • Area behind mounting plates MUST be reinforced using a minimum of 1/2"...