Install The Software - Canon PIXMA MP130 Easy Setup Instructions

6

Install the software.

IMPORTANT
• Close any open software applications, including anti-virus applications prior to installing the
software.
There are two ways you can install the software: Easy Install or Custom Install.
Easy Install is recommended for the first-time users, and Custom Install is for the advanced users.
This sheet explains Easy Install only.
IMPORTANT
• Do not connect the USB cable until Step 3, "Connect the USB cable."
The following software programs are included on the Setup CD-ROM:
• On-screen Manual • MP Drivers
• Easy-WebPrint • Easy-PhotoPrint
• ScanSoft OmniPage SE • e-reg
IMPORTANT
• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall
this version before installing the new version. For instructions on uninstallation, see the guides for
that version of MultiPASS Suite.
• When installing the software in Windows 2000, you must log on as Administrator or have
Administrator privileges, and when installing the software in Windows XP, you must log on as
Administrator.
Step 1 Prepare the Setup CD-ROM.
1
Turn ON your computer, and start Windows.
2
Insert the Setup CD-ROM into the CD-ROM drive.
• The setup program should automatically run. If the setup program does not automatically run, click
[My Computer], then double-click [Msetup4.exe] on the Setup CD-ROM.
IMPORTANT
• If you see the "Found New Hardware Wizard", the USB
cable is connected. Disconnect the USB cable then click
Cancel.
Step 2 Install the software.
1
Click [Easy Install], then click [Install].
• To view the descriptions of the software programs, click [i] icon.
2
Click [Yes].
• Installation begins. Follow the on-screen
instructions to install the software.
4
Click [Exit].
• If prompted, restart your computer.
• When the Registration window appears, follow the on-screen instructions to ensure product support.
The serial number is located on the back of the printer.
Step 3 Connect the USB cable.
• Make sure your machine and computer are turned ON.
• When connecting the USB cable, the computer will automatically detect and install necessary
information.
• In Windows 2000, the machine may not be set as the default printer.
• MP Navigator
• ArcSoft PhotoStudio
3
Click [Continue].
• Follow the displayed instructions.
The following software programs are included on the Setup CD-ROM:
• On-screen Manual • MP Drivers
• Easy-PhotoPrint • ArcSoft PhotoStudio
• e-reg
IMPORTANT
• When installing the software, you must log on as a user with Administrator privileges.
• Mac OS X Classic users: This machine does not support the Mac OS X Classic environments.
Step 1 Connect the USB cable.
• Make sure the machine is turned ON.
Step 2 Prepare the Setup CD-ROM.
1
Turn ON your computer, and start Mac OS X.
2
Insert the Setup CD-ROM into the CD-ROM drive.
• The setup program should automatically run. If the setup program does not automatically run, double-
click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD-ROM and click [File] menu and
then select [Open].
Step 3 Enter the name and password for an Administrator
Account.
1
Enter the name for Administrator.
2
Enter the password and then click [OK].
Step 4 Install the software.
1
Click [Easy Install], then click [Install].
• To view descriptions of the software programs, click the [i] icon.
2
Click [Yes].
• Installation begins. Follow the on-screen
instructions to install the software.
4
Click [Restart] to restart your
computer.
• When the Registration window appears, follow the on-screen instructions to ensure product support.
The serial number is located on the back of the printer.
You now have completed installation of the software.
• MP Navigator
• ScanSoft OmniPage SE
3
Click [Continue].
• Follow the displayed instructions.