Table of Contents
Advertisement
Steps
1. Place the fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the fan to the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
4. Connect the fan cable to the system board.
5. Adhere the tape that secures the fan cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Side speakers
Removing the side speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the side speakers and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
25
Advertisement
Table of Contents
