Steps
1. Place and snap the base cover into place on the palm-rest and keyboard assembly.
2. Tighten the three captive screws(M2x7.5) that secure the base cover to the palm-rest and keyboard assembly.
3. Replace the six screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in
Memory
Removing the memory
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the memory and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
15