Table of Contents
Advertisement
Steps
1. Using the alignment posts, place the power-button with fingerprint reader on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2.5) that secure the power-button with fingerprint reader to the palm-rest and keyboard
assembly.
Next steps
1. Install the
power-button
2. Install the
IO
board.
3. Install the
base
cover.
4. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the display assembly and provides a visual representation of the removal
procedure.
board.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
47
Advertisement
Table of Contents
