TRANSTEK LS802-GP Quick Start Manual

Quick Start
Guide
Vital Remote Links Body Scale
Pro Cellular Blood Pressure
Monitor LS802-GP
1
Insert four AA batteries into
the back of the scale. Once
inserted, the scale will perform an
initial secure pairing with the
mobile network.
Transmission in progress
3
When symbol
the LCD, indicating pair-up
succeed. Then the device
will turn off automatically.
5
Wrap the cuff around your arm,
make sure the cuff edge 1 inch
(2-3 cm) above the elbow.
Don't make it too tight—allow a
finger to fit between the cuff and
your arm.
7
Press the "
turn on the monitor, remain
still until the cuff deflates
completely.
9
Data transmission after
measurement.
The symbol
on the LCD.
shown on
" button to
blinks
2
The whole LCD display, then
the symbol
be shown alternatively on the
LCD, indicating pair-up is
proceeding.
Transmission successful
4
Plug the connector on cuff
tube into the device.
6
Lay your arm on a table with
your palm facing up. The cuff
should be at the same height
as your heart.
8
Display and save the results.
10
3.If the data is successfully
ransmitted, the symbol
disappear and the LCD will display
and then the device will turn off.
and will
will