Noise Vibration The typical A-weighted noise level determined accord- ing to EN62841-2-6: The vibration total value (tri-axial vector sum) deter- Model HM1511 mined according to EN62841-2-6: Sound pressure level (L ) : 85 dB (A) Model HM1511 Sound power level (L ) : 105 dB (A) Work mode: chiselling Uncertainty (K) : 1.57 dB (A)
In cold weather or when the tool has not been WARNING: The vibration emission during actual used for a long time, let the tool warm up for use of the power tool can differ from the declared val- a while by operating it under no load. This ue(s) depending on the ways in which the tool is used will loosen up the lubrication.
Then pull out and turn the tool retainer 180° to secure the bit. • Soft no-load rotation function ► Fig.5: 1. Bit 2. Tool retainer 3. Tool holder (For Model HM1511, HM1512, HM1512E only) Blows at no load per minute becomes smaller than For Model HM1512, HM1512E, HM1502, those on load in order to reduce vibration under no HM1502E only load, but this does not show trouble.
► Fig.14: 1. Groove 2. 30 mm to 100 mm CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other OPERATION accessories or attachments might present a risk of injury to persons. Only use accessory or attachment...