Table of Contents
Advertisement
D. CONTROLS
Accepting the warning
Menu button
Run / Hold
ON/OFF slide switch: Slide in the upper position to turn on unit.
&
) Remark: To stretch the life of your batteries, the unit will turn off after approx. 10 minutes
if left idle. Press any key to resume. If you do not want it to turn off automatically, you can
select 'Eco mode OFF' in the menu (see further).
'Run'/'Hold'-button: When pressed, the unit toggles between 'Run'-mode and 'Hold'-mode.
'MENU'-button: Press once at turn-on to accept warnings. Press to enter or leave scope
menu.
Up/Down/Left/Right buttons: To control the various functions of the scope, which are
explained further in this manual.
• Changing the volts/div.
• Changing the setup mode in the setup menu.
• Changing the position of the time markers during
HOLD-mode.
• Changing the timebase.
• Scrolling up/down in the setup-menu.
• Changing the position of the voltage markers during HOLD-mode.
Changing the position of the trigger level during RUN-mode.
- 13 -
Controls
Advertisement
Table of Contents
