Portwell NANO-6051 User Manual

Nano-itx embedded motherboard

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

NANO-6051

NANO-ITX Embedded Motherboard

Version 1.1

NANO-6051 User's Guide

Table of Contents

Need help?

Do you have a question about the NANO-6051 and is the answer not in the manual?

Questions and answers

Summary of Contents for Portwell NANO-6051

Page 3: Table Of Contents
6.2 Main Memory ........................................40 6.3 Installing the Single Board Computer ................................. 41 6.3.1 Chipset Component Driver ..................................41 6.3.2 Intel® HD Graphics 620 ................................... 42 6.3.3 Intel LAN I210IT/I219LM Gigabit Ethernet Controller ........................... 42 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 4 7.2.5 Save & Exit ......................................75 Troubleshooting ........................................76 Hardware Quick Installation ................................... 76 BIOS Setting ......................................77 FAQ ........................................78 Portwell Software Service ...................................... 80 Industry Specifications ......................................81 10.1 Industry Specifications ................................... 81 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 5 Portwell provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. Portwell assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
Page 6 Warranty”). Portwell may in its sole discretion modify its Limited Warranty at any time and from time to time. Beginning on the date of shipment to its direct customer and continuing for the published warranty period, Portwell represents that the products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or due to non conformance to the agreed upon specifications, will be repaired or exchanged, at Portwell’s option and expense.
Page 7: Introduction
DDR4 SODIMM socket up to 32GB system memory and comes with one M.2 E key socket, one M.2 M key socket, Dual mini DP ports, two GbE Ethernet, one COM port support RS-232/422/485, four USB3.1(Gen1) on board and two USB3.1(Gen2) on REAR IO. The NANO-6051 can provide the low power consumption for low profile fanless applications such as POS, Print Imaging, ATM, Kiosk, Medical, Panel PC, Digital Security and Digital Signage.
Page 8: Specifications
◆ Mic-in. Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus. ◆ Ethernet Controller: Intel I210AT / I219LM ◆ High Drive GPIO One pin-header for GPIO(8bit in / out) ◆ Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 9: Supported Operating Systems
Power supply voltage: 12V DC in ◆ Board size: 120mm x 120 mm (4.72" x 4.72") ◆ 2.1 Supported Operating Systems The NANO-6051 supports the following operating systems. Windows* 10 IoT Enterprise RS5 (64b)  Ubuntu*, SUSE, Red Hat* Enterprise (64b) ...
Page 11: Power Consumption
NANO-6051 2.3 Power Consumption Test Configuration CPU Type Intel® Core™ i5-8365UE CPU @ 1.60GHz SBC BIOS Portwell, Inc. NANO-6051 BIOS Rev.:0.0.3 (11052019) Memory Samsung DDR4 SO-DIMM 2666/32GB *1 VGA Card Onboard Intel® UHD Graphics 620 VGA Driver Intel® HD Graphics 620 , Version: 26.20.100.7158 LAN Card #1 Onboard Intel®...
Page 12: Environmental Specifications
CPU +12V 0.9 A 2.2 A 1.7 A USB 3.0 Loading Test 4.93V/ 970 mA 2.4 Environmental Specifications Storage Temperature : -40~85°C Operation Temperature : 0~60°C Storage Humidity : 5~95% Operation Humidity: 10~90% Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 14: Hardware Configuration
NANO-6051 4 Hardware Configuration 4.1 Jumpers and Connectors Note. Top side with J16/J17 Note. Top side with J18/J19 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 15: Jumper Settings
4.2 Jumper Settings For users to customize NANO-6051’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Page 16 Select 5V 2-3, Short Select 3.3V JP5: ATX/AT Mode selection PIN No. Description 1-2 Short AT mode 2-3 Short ATX mode JP6: Clear CMOS PIN No. Description 1-2, Short Normal 2-3, Short Clear CMOS Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 17: Connector Settings
MiniDP (DDI1) MiniDP (DDI2) RJ45 (i219) RJ45 (i210) USB2.0/3.0(Gen2) Connector (Type-A) Port1 USB2.0/3.0(Gen2) Connector (Type-A) Port2 ATX 4P connector (+12v) M2 2280 Connector (M-Key) NVMe/SATA RTC Battery Connector 3WAFER2x1P GPIO pin header Header5Px2/2mm Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 18 USB2.0/3.1(Gen1) Connector BH10Px2/2.0mm EC’s SMBUS debug Pin header PH5Px1-Pin2/2.54mm Front Panel Pin header Header4Px2/2mm Audio pin header Header4Px2/2mm Port80 Pin header Header5Px2-Pin9/2.5 J1: DC-in Jack PIN No. Description PWR_LED (+) PWR_LED (-) I219_LAN (+) Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 20 NANO-6051 J3：MiniDP connector (DDI1) PIN No. Description PIN No. Description DP_HPD1# DDI1_R_TXP0 OC_AUX_EN1# DDI1_R_TXN0 CFG2 DDI1_R_TXP1 DDI1_R_TXP3 DDI1_R_TXN1 DDI1_R_TXN3 DDI1_R_TXP2 DPD_OC_AUX_P DDI1_R_TXN2 DPD_OC_AUX_N DP_PWR CGND CGND CGND CGND Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 21 NANO-6051 J4: MiniDP connector (DDI2) PIN No. Description PIN No. Description DP_HPD2# DDI2_R_TXP0 OC_AUX_EN2# DDI2_R_TXN0 CFG2 DDI2_R_TXP1 DDI2_R_TXP3 DDI2_R_TXN1 DDI2_R_TXN3 DDI2_R_TXP2 DPD_OC_AUX_P DDI2_R_TXN2 DPD_OC_AUX_N DP_PWR CGND CGND CGND CGND Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 22 NANO-6051 J5: RJ45 connector PIN No. Description PIN No. Description L1_MDI0_P L1_MDI0_N L1_MDI1_P L1_MDI1_N Center Tap Center Tap L1_MDI2_P L1_MDI2_N L1_MDI3_P L1_MDI3_N L1_LED1 L1_LED2 L1_LED0 +V3P3A CGND CGND Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 23 PIN No. Description L2_MDI0_P L2_MDI0_N L2_MDI1_P L2_MDI1_N Center Tap Center Tap L2_MDI2_P L2_MDI2_N L2_MDI3_P L2_MDI3_N L2_LED1 L2_LED2 L2_LED0 +V3P3A CGND CGND J7: USB2.0/USB3.1(Gen2) Connector PIN No. DESCRIPTION VUSB_V1 USB2_P1_DN_R USB2_P1_DP_R Ground USB3_RX1_DN_R USB3_RX1_DP_R Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 24 NANO-6051 Ground USB3_TX1_DN_R USB3_TX1_DP_R J8: USB2.0/USB3.1(Gen2) Connector PIN No. DESCRIPTION VUSB_V1 USB2_P1_DN_R USB2_P1_DP_R Ground USB3_RX1_DN_R USB3_RX1_DP_R Ground USB3_TX1_DN_R USB3_TX1_DP_R Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 26 NANO-6051 PIN No. Description PIN No. Description VCC3 VCC3 PCIE9_RXN PCIE9_RXP M2_SATA_LED# PCIE9_TXN VCC3 PCIE9_TXP VCC3 VCC3 PCIE10_RXN VCC3 PCIE10_RXP PCIE10_TXN PCIE10_TXP PCIE11_RXN PCIE11_RXP PCIE11_TXN Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 27 NANO-6051 PCIE11_TXP M2_DEVSLP RX0_N/SATA_B+ RX0_P/SATA_B- TX0_N/SATA_A- TX0_P/SATA_A+ BUF_M2_PLTRST# CK_PCIE_M2M_REQ# CLK_PCIE_M2_2280_N M.2_PCIE_WAKE_N CLK_PCIE_M2_2280_P KEY-M KEY-M KEY-M KEY-M KEY-M KEY-M KEY-M KEY-M SUS_CLK SATA#_PCIE_SEL VCC3 VCC3 VCC3 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 28 NANO-6051 J11: RTC battery connector PIN No. Description BAT3V J12: GPIO pin header PIN No. Description PIN No. Description GPI_0 GPO_0 GPI_1 GPO_1 GPI_2 GPO_2 GPI_3 GPO_3 Ground Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 29 J14: COM port pin Header PIN No. Description PIN No. Description DCD#1/DT- RXD#1/DT+ TXD#1/422R+ DTR#1/422R- DSR#1 RTS#1 CTS#1 RI#1 J15: M2 2230 connector (E-Key) PIN No. Description PIN No. Description Ground 3.3V USB2_2P_10 3.3V USB2_2N_10 SD_CLK SD_CMD Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 30 NANO-6051 SD_D0 SD_D1 SD_D2 SD_D3 UART_BT_ALERT# SDIO_WAKE_N M.2_RXD BUF_M2_PLTRST# E-Key E-Key E-Key E-Key E-Key E-Key E-Key E-Key M.2_TXD M.2_CTS_N PCIE14_TXP M.2_RTS_N PCIE14_TXN M2_E_CLRST# M2_CL_DAT PCIE14_RXP M2_E_CL_CLK PCIE14_RXN CLK_PCIE_M2_2230_P CLK_PCIE_M2_2230_N SUS_CLK BUF_M2_PLTRST# Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 32 PIN No. Description VUSB_V3 USB3_RX3_DN_R VUSB_V3 USB3_RX3_DP_R USB3_RX4_DN_R USB3_RX4_DP_R USB3_TX3_DN_R USB3_TX3_DP_R USB3_TX4_DN_R USB3_TX4_DP_R USB2_P3_DN_R USB2_P3_DP_R USB2_P4_DN_R USB2_P4_DP_R PS. J16 is for USB port 3 and 4, J17 is for USB port5 and 6. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 33 USB3_TX4_DP_R USB3_TX3_DP_R USB3_TX4_DN_R USB3_TX3_DN_R USB3_RX4_DP_R USB3_RX3_DP_R USB3_RX4_DN_R USB3_RX3_DN_R VUSB_V3 VUSB_V3 PS. J18 is for USB port 3 and 4, J19 is for USB port5 and 6. PS. J18/J19 is default connector (Blue color) Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 34 NANO-6051 J20: EC’s SMBUS debug Pin header PIN No. Description SMB1_CLK_MAIN SMB1_DATA_MAIN VCC5 J21: Front Panel Pin header PIN No. Description PIN No. Description VCC5 SATA_LED_N VCC5 BUZZER RST_BTN_N EXT_PWRBTN# Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 35 JP2: Audio pin header PIN No. Description PIN No. Description MIC_IN_B_L LINE_IN_B_L GNDAU LINE_IN_T_R FRNT_OUT_B_L GNDAU FRNT_OUT_T_R MIC_IN_T_R JP4: Port80 Pin header PIN No. Description PIN No. Description LAD0 VCC3 LAD1 PLT_RST_5121# LAD2 LFRAME# LAD3 80H_LPC1CLK Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 36: Signal Descriptions
// WDT Timer Counter Register (Minute) #Define WDTSEC 0x08 // WDT Timer Counter Register (Second) #Define EC_IOPort 0xE300 // Default, reference to BIOS configuration VOID Write_EC_SRAM(UINT8 Offset,UINT8 Value){ IoWrite8(EC_IOPort+Offset,Value); Byte Read_EC_SRAM(UINT8 Offset){ IoRead8(EC_IOPort+offset,Value); return Value; void WDT() Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 37 Write_EC_SRAM(WDTCFG,0x01); //Bit0: WDT Enable, BIT1: 0:Second Mode // Enable WDT 5min Write_EC_SRAM(WDTSEC,5); Write_EC_SRAM(WDTCFG,0x03); //Bit0: WDT Enable, BIT1: 1:Minute Mode // Enable WDT 10min, 20sec Write_EC_SRAM(WDTSEC,20); Write_EC_SRAM(WDTSEC,10); Write_EC_SRAM(WDTCFG,0x03); //Bit0: WDT Enable, BIT1: 1:Minute Mode Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 38: Signal Gpio Signal
Bit3 = GPI3, Bit2 = GPI2, ..., // 0: Low; 1: High #Define EC_IOPort 0xE300 // Default, reference to BIOS configuration VOID Write_EC_SRAM(UINT8 Offset,UINT8 Value){ IoWrite8(EC_IOPort+Offset,Value); Byte Read_EC_SRAM(UINT8 Offset){ IoRead8(EC_IOPort+offset,Value); return Value; void GPIO() Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 39 NANO-6051 int Temp; // Get GPI status Temp = Read_EC_SRAM(GPDR); //Bit3-0: GPI3-0 status // Set GPO4 Output & High Temp = Read_EC_SRAM(GPDR); Write_EC_SRAM(GPDR,Temp|0x80); //Bit7-4: Set GPO3-0 status, 0: Low 1: High Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 40: System Resources
Intel Core i3-8145UE 2.2GHz Dual Core (4M Cache, up to 3.90 GHz) 6.2 Main Memory NANO-6051 provides 1 x 260-pin SO-DIMM sockets which supports DDR4 non-ECC memory. The maximum memory can be up to 32GB. Memory clock and related settings can be detected by BIOS via SPD interface.
Page 41: Installing The Single Board Computer
6.3.1 Chipset Component Driver The NANO-6051 build with Intel® Whiskey lake-U process . It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 10, please install its INF before any of other Drivers are installed. You can find very easily this chipset component driver in NANO-6051 CD-title Copyright ©...
Page 42: Intel® Hd Graphics 620
6.3.2 Intel® HD Graphics 620 NANO-6051 has integrated Intel® HD Graphics 620 Processor Graphics indicates graphics processing circuitry integrated into the processor, providing the graphics, compute, media, and display capabilities. Intel® HD Graphics, Iris™ Graphics, Iris Plus Graphics, and Iris Pro Graphics deliver enhanced media conversion, fast frame rates, and 4K Ultra HD (UHD) video NANO-6051 supports Dual mini DP port output.
Page 43: Bios Setup Items
The BIOS setup program provides a General Help screen. The menu can be easily called up from any menu by pressing <F1>. The Help screen lists all the possible keys to use and the selections for the highlighted item. Press <Esc> to exit the Help Screen. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 46 The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Date System Time The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 49 PMG_IO_BASE_ADDRBASE+offset to MWAIT(offset) Maximum Package C State Limit Setting. Cpu Default: Leaves to Factory default value. ★Auto ,C0/C1,C2,C3,C6,C7, Package C State Limit Auto: Initializes to deepest available Package C States Limit C7S,C8,C9,C10,Cpu Default, Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 50 This is enabled automatically when Aperture Size is set to 2048MB ★Enabled, Disabled HD Audio Control Detection of the HD-Audio device Port 80h Redirection Control where the Port 80h cycles are sent ★LPC Bus, PCIE Bus Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 51 AMT BIOS Features ★Enabled, Disabled access MEBx Setup. Note: This option does not disable Manageability Features in FW ME Unconfig on RTC Clear When Disable ME will not be unconfigured on RTC Clear ★Disabled, Enabled Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 53 Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used DVMT Pre-Allocated by the Internal Graphics Device. 28M,32M,/F7,36M,40M,44M,48M,52M,56M,60M Select DVMT5.0 Total Graphic Memory size used by the Internal ★256M, 128M, MAX DVMT Total Gfx Mem Graphics Device Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 55 (G3 state) Enable or disable System wake on alarm event. When enabled, System ★Disabled, Enabled Wake System from S5 via RTC will wake on the hr::min::sec Specified/programmed by the Tools from OS Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 57 Set the ASPM Level: Force L0s – Force all links to L0s State ★Auto ,Disabled, L0s, L1, L0sL1, ASPM 8/9/14 AUTO-BIOS auto configure DISABLE – Disables ASPM ★Auto, Gen1, Gen2, Gen3 PCIe Speed Configure PCIe Speed Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 59 Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys PXE boot wait time ★0 to set value. Number of times the presence of media will be checked. Use either +/- or numeric keys to set Media detect count ★1 value. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 61 Hot Plug Designates this port as Hot Pluggable ★Disabled, Enabled ★Hard Disk Drive, Solid State Drive SATA Device Type Identify the SATA port is connected to Solid State Drive or Hard Disk Drive Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 63 This is a workaround for OSes without XHCI hand-off support. The XHCI ownership XHCI Hand-off ★Enabled , Disabled change should be claimed by XHCI driver USB Mass Storage Driver Enable/Disable USB Mass Storage Driver Support ★Enabled , Disabled Support Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 65 TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 ★Auto, TPM 1.2, TPM 2.0 Device Select devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 66 System Super IO Chip Parameters. Feature Description Options Watch Dog Timer Enable/Disable Watch Dog Timer ★Disabled, Enabled ★Second, Minute Timer Unit Select Timer count unit of WDT Timer value Set WDT Timer value ★20 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 67 ★RS-232,RS-485 HALF RS-232/422/485 Control Option Serial Port RS-232/422/485 Control Option DUPLEX,RS-422 FULL DUPLAX ★Auto, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 Change Settings Select an optimal settings for Super IO Device IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 69 NANO-6051 Serial Port Console Redirection Serial Port Console Redirection Feature Description Options Console Redirection Console Redirection Enable or Disable ★Disabled, Enabled Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 71 With this mode enabled only text will be sent. This is to capture Terminal ★Disabled, Enabled Recorder Mode data. ★Disabled, Enabled Resolution 100x31 Enables or disables extended terminal resolution ★VT100, LINUX,XTERMR6, SCO,ESCN,VT400 Putty KeyPad Select FunctionKey and KeyPad on Putty Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 72: Security
7.2.3 Security Feature Description Options [Setup] check password when enter setup screen. [Power on] check password on ★Setup, Power on Password Check Mode every time system power on. Administrator Password Set Administrator Password Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 74 Select boot mode LEGACY/UEFI ★Hard Disk, NVME, UEFI AP, Boot Option #1~7 Sets the system boot order CD/DVD,SD,USB Device, Network, Disabled UEFI Application Boot Priorities Specifies the Boot Device Priority sequence from available UEFI Application Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 75: Save & Exit
Restore Defaults Restore/Load Default values for all the setup options. UEFI: Built-in EFI Shell Attempts to Launch EFI Shell application (Shell.efi) from one of the available Launch EFI Shell from filesystem device filesystem devices. Copyright © Portwell 2020 NANO-6051 User's Guide...
Page 76: Troubleshooting
ATX Power Setting Unlike other Single board computer, NANO-6051 supports ATX 12V 4 Pin or DC 12V Power adaptor only. Therefore, there is no other setting that needs to be setup. However, there is ATX 4 Pin Connector – J9& DC JACK – J1 on the NANO‐6051 board.
Page 77: Bios Setting
BIOS setting back to the initial factory configurations. It is recommended to do this so you can be sure the system is running with the BIOS setting that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting at any time when system appears to be unstable in boot up sequence.
Page 78: Faq
Question: I forgot my password of system BIOS, what am I supposed to do? Answer: You can switch off your power supply then find the JP6 on the NANO-6051 board to set it from 1-2 short to 2-3 short and wait 5 seconds to clean your password then set it back to 1-2 short to switch on your power supply.
Page 79 NANO-6051 Question: How to update the BIOS file of NANO-6051? Answer: 1. Please visit web site of Portwell download center as below hyperlink http://www.portwell.com.tw/support/download_center.php Registering an account in advance is a must. (The E-Mail box should be an existing Company email address that you check regularly.) http://www.portwell.com.tw/member/newmember.php...
Page 80: Portwell Software Service
NANO-6051 9 Portwell Software Service 1. If you have customized requirements of BIOS, you can contact person of our company or branch. 2. If you have requirements of WDT、GPIO APP, you can contact our headquarter or branch, and we can render you assistance on developing.
Page 81: Industry Specifications
NANO-6051 10 Industry Specifications 10.1 Industry Specifications The list below provides links to industry specifications that apply to Portwell modules. Low Pin Count Interface Specification, Revision 1.0 (LPC) http://www.intel.com/design/chipsets/industry/lpc.htm Universal Serial Bus (USB) Specification, Revision 2.0 http://www.usb.org/home PCI Specification, Revision 2.3 https://www.pcisig.com/specifications...

Portwell NANO-6051 User Manual

Quick Links

Need help?

Questions and answers

Summary of Contents for Portwell NANO-6051

Page 3: Table Of Contents

Page 7: Introduction

Page 8: Specifications

Page 9: Supported Operating Systems

Page 10: Mechanical Dimensions

Page 11: Power Consumption

Page 12: Environmental Specifications

Page 13: Block Diagram

Page 14: Hardware Configuration

Page 15: Jumper Settings

Page 17: Connector Settings

Page 36: Signal Descriptions

Page 38: Signal Gpio Signal

Page 40: System Resources

Page 41: Installing The Single Board Computer

Page 42: Intel® Hd Graphics 620

Page 43: Bios Setup Items

Page 45: Main

Page 47: Configuration

Page 72: Security

Page 73: Boot

Page 75: Save & Exit

Page 76: Troubleshooting

Page 77: Bios Setting

Page 78: Faq

Page 80: Portwell Software Service

Page 81: Industry Specifications

Portwell NANO-6051 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Portwell NANO-6051

Summary of Contents for Portwell NANO-6051

Table of Contents