Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Skil PWRCORE 20 AG2907E-00
Summary of Contents for Skil PWRCORE 20 AG2907E-00
- Page 1 Model: AG2907E-00 Brushless 125mm Angle Grinder WARNING: To reduce the risk of injury, the user must read and understand the Owner’s Manual before using this product. Save these instructions for future reference. 1300-017-545 www.skil.com.au For Customer Service...
-
Page 2: Specifications
On/off locking switch Battery level indicator Ventilation slots Ventilation slots Spindle- Spanner Ventilation slots lock button Auxiliary Spindle handle Protective guard Protective guard lever Mounting flange Clamping flange NOT STANDARD INCLUDED SPECIFICATIONS Rated Voltage 20V max d.c Rated Speed 8500 /min Wheel Diameter 125mm Spindle Hole Diameter... - Page 4 Protective guard Protective guard lever Protective guard screw...
- Page 5 30º-40º...
-
Page 7: Electrical Safety
INTRODUCTION a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not • This tool is intended for light grinding, cutting and use a power tool while you are tired or under the deburring metal and stone materials without the use of influence of drugs, alcohol or medication. -
Page 8: Safety Warnings Common For Grinding Or Abrasive Cutting-Off Operations
g) Use the power tool, accessories and tool bits etc., manufacturer. Just because the accessory can be in accordance with these instructions, taking into attached to your power tool, it does not assure safe account the working conditions and the work to be operation. -
Page 9: Kickback And Related Warnings
n) Regularly clean the power tool’s air vents. The amount of wheel is exposed towards the operator. motor’s fan will draw the dust inside the housing and The guard helps to protect the operator from broken excessive accumulation of powdered metal may cause wheel fragments, accidental contact with wheel and electrical hazards. - Page 10 ACCESSORIES • Do not disassemble the battery • SKIL can assure flawless functioning of the tool only • Do not expose tool/battery to rain when original accessories are used • Permitted ambient temperature (tool/charger/battery): • For mounting/using non-SKIL accessories observe the - when charging 4...40°C...
-
Page 11: Maintenance & Service
• Grinding 9 - move the tool back and forth with moderate pressure ! never use a cutting disc for side grinding • Cutting q - do not tilt the tool while cutting - always move the tool in same direction as arrow on tool head, in order to prevent the tool from being pushed out of the cut in an uncontrolled manner - do not apply pressure on the tool;... -
Page 12: Warranty
SKIL products that are not purchased from an authorised SKIL retailer. To make a claim, return the faulty item together with proof of purchase directly to your closest service agent or to the place of purchase.