Advertisement
Care and Maintenance
Clean the pre-filter and Multi-protection filter
1. When "
" light up, it is necessary to clean the pre-filter and Multi- p rotection filter.
2. Take off the back cover of main unit , pre-filter is integrated into the back cover.
3. Take off the Multi-protection filter and remove the dust on filter by vacuum them gently.
4. Return the Multi-protection filter to the main unit with the tag side face outward.
5. Return the back cover to the main unit.
6. At this moment, the "
disappear.
WARNING
Multi-purpose filter:
Never wash with water. Vacuum the
Multi-protection filter ver y gently and
the filter (especially the side with Active
Carbon) may be damaged if too much force
was applied.
Defrost
1. The Defrost
"
" indicator will light up and dehumidifier will start defrost cycle.
Defrosting operation:
2.
23
Caution
•
During the defrosting operation, the dehumidifiying function
•
Please don't turn off the power or pull out the power plug of the dehumidifier during the defrosting operation.
46
" still light up, press the " ALERT " key for more than 8 seconds until
Remark:
•
For Multi-protection filter, it is suggested to replace a new
one every 5 years but it depends on the environment.The life
of Multi-protection filter will be shorten if the room always
occupied with cigarette smoke or dusty air,etc..
•
N ano-Silver Ion coating and Pre-filter are washable.Make
sure to dr y them completely before replacing it to the
machine.
•
Nano-Silver Ion coating is a filter with nano silver
coating, which is in silver color. It may change color
( such as black or gray) if wash frequently.
Defrosting is not available
may intermit.
CAUTION
Advertisement
