Replacing The Fuses - Yamaha Fazzio 2022 Owner's Manual

Periodic maintenance and adjustment

Replacing the fuses

The fuse box, which contains the fuses
for the individual circuits, is located be-
hind panel B. (See page 10-8.)
1
1. Fuse box
10
EAUN3540
1234 5
6
1. Main fuse
2. Signaling system fuse 1
3. Signaling system fuse 2
4. Backup fuse
5. Auxiliary DC connector fuse
6. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn off the electrical circuit in
question, and then turn off the
main switch.
2. Remove panel B. (See page 10-8.)
3. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
10-28
Specified fuses:
Main fuse:
Signaling system fuse 1:
Signaling system fuse 2:
Backup fuse:
Auxiliary DC connector fuse:
4. Turn the main switch on, and then
turn on the electrical circuit in
question to check if the device op-
erates.
TIP
If the fuse immediately blows again,
have a Yamaha dealer check the elec-
trical system.
5. Install panel B by installing the
screws.
[EWA15132]
20.0 A
7.5 A
7.5 A
7.5 A
2.0 A