Main Switch - Yamaha Fazzio 2022 Owner's Manual

Smart key system (LCF125-F)

Main switch

4
1. Main switch knob
1. Smart key system indicator light "
The main switch is used to turn the ve-
hicle power ON/OFF, lock/unlock the
steering, and open the seat. After
pushing the main switch knob (and
confirmation with the smart key has
taken place), the main switch can be
EAUN2101
turned while the smart key system indi-
cator light is on (approximately 4 sec-
onds).
1
WARNING
Never turn the main switch to
"OFF", " ", or "OPEN" while the ve-
hicle is moving. Otherwise the elec-
trical systems will be switched off,
which may result in loss of control or
an accident.
TIP
1
Do not push the main switch knob re-
peatedly or turn the main switch back
and forth excessively (beyond normal
use). To protect the main switch from
damage, the smart key system will
temporarily disable, and the smart key
system indicator light will flash. If this
occurs, wait until the indicator light
"
stops flashing, and then operate the
main switch.
The main switch positions are de-
scribed below.
ON
1
EWA18720
1. Push.
2. Turn.
All electrical circuits are supplied with
power, and the engine can be started.
To turn the vehicle power on
1. Turn the smart key on and bring it
2. Push the main switch knob and
3. While the smart key system indi-
4-8
2
within operating range.
the smart key indicator light will
come on for approximately 4 sec-
onds.
cator light is on, turn the main
switch to "ON". All of the turn sig-
nal lights will flash twice and the
vehicle power will turn on.
EAU76502