Table of Contents
Advertisement
Introduction
This manual provides user-service information for the 525A Temperature/Pressure
Calibrator (hereafter referred to as "the Calibrator"). Details regarding verification of the
Calibrator's functionality and calibration, basic maintenance, contacting Fluke service
centers, and important safety information are also contained within this manual.
Contacting Fluke
To contact Fluke, order accessories, or locate the nearest Fluke Service Center or
distributor, call:
•
USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31-402-678-200
•
Japan: +81-3-3434-0181
•
Singapore: +65-738-5655
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at www.fluke.com.
Safety Information
The Calibrator complies with EN 61010, ANSI/ISA-S82.01-1994, and CAN/CSA-C22.2
No. 1010.1-92. Use the Calibrator only as specified in this manual, otherwise the
protection provided by the Calibrator may be impaired.
CAT II equipment is designed to protect against transients from energy-consuming
equipment supplied from a fixed installation, such as televisions, personal computers,
portable tools, and other household appliances.
A "WWarning" statement identifies hazardous conditions and actions that could cause
bodily harm or death.
A "WCaution" statement identifies conditions and actions that could damage the
Calibrator or the equipment under test.
International symbols used on the Calibrator and in this manual are explained in Table 1.
525A
1
Advertisement
Table of Contents
