Basic Operation Process; Mode Selection - Scantech KSCAN-Magic User Manual

4 Basic Operation Process

This chapter focuses on the mode selection of the KSCAN series, the
photogrammetry operation flow and the scanning operation flow.

4.1 Mode Selection

The KSCAN series of composite 3D scanners are equipped with red and blue
two-color laser and photogrammetry system modules, including global
photogrammetry, red light fast scanning and blue light fine scanning. Please
select the appropriate working mode according to the measured object (refer to
Table 4-1).
Name
Glopho(GL) Photogrammetry
ScanViewer(SV)
ScanViewer(SV)
ScanViewer(SV)
ScanViewer(SV)
Table4- 1
Mode Object Size
Medium and large
measurement
Medium and large
Blue light fast
scan
Large workpiece
Blue light fine
scan
Medium and large
Infrared scan
workpiece with
Deep hole
special features
Resolution
workpiece
workpiece 0.050mm
scanning
with small 0.010mm
features
workpiece > 1.0mm
scanning
20
Accuracy
0.02mm+0.0
/
25mm/m
0.02mm+0.0
35mm/m
0.01mm+0.0
35mm/m
0.02mm+0.0
35mm/m
0.02mm+0.0
/
35mm/m