Working Principle - Scantech KSCAN-Magic User Manual

Based on the above, the PRINCE series handheld 3D scanner has a red and blue
two-color laser. It also has two modes: red light fast scanning and blue light fine
scanning. The two modes can be quickly switched, scanning efficiency and local
details can be obtained.
AXE series of handheld 3D scanners use a multiplexed lens and a built-in
photogrammetric module to complete high-precision scanning of medium and
large objects without any equipment.
KSCAN series 3D scanner with built-in red and blue two-color laser and
photogrammetry system module, with global photogrammetry, red light fast scan
and blue light fine scan mode, greatly optimized the maximum scan size and
scanning accuracy, providing a full-size solution from 0.02m to 10m industrial
measurement. The scanner supports contact measurement, which can acquire
high-precision 3D data of key parts such as hole position, plane and boundary.
The supporting ScanViewer software is equipped with measurement and analysis
functions such as tube measurement and deformation detection, providing
efficient, reliable and comprehensive 3D measurement technology support for
product design and inspection professionals.
This manual mainly introduces the use of KSCAN series 3D scanner (hereinafter
referred to as KSCAN scanner, KSCAN or scanner).

1.3 Working principle

The KSCAN scanner is an instrument that uses the binocular vision principle to
obtain a spatial 3D point cloud. The working position is obtained by using the
mark points to obtain the spatial position of the scanner and the measured object,
and the laser light is emitted by the laser emitter to illuminate the surface of the
2