Turning Off An Alarm Or The Hourly Time Signal; Stopwatch; Measuring Elapsed Time; Measuring A Split Time - Casio 5699 Operation Manual

Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm 2
Alarm 1
Snooze
Hourly time signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to scroll through the alarm
numbers ([AL1], [AL2], [SNZ]) and hourly
time signal ([SIG]) screens until the item
you want to turn off is displayed.
Alarm number or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
Each press of (A) toggles between ON
●
and OFF.
Watch Operation Guide 5699
The stopwatch measures elapsed time in units
of 1/100 second up to 23 hours, 59 minutes,
59.99 seconds (24 hours).
When this maximum limit is exceeded,
elapsed time measurement returns to 0 and
timing continues from there.

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
3.
Press (A) to reset the stopwatch to all
zeros.

Stopwatch

Start
Stop
Resume
Stop
Seconds, 1/100 seconds
Hours, minutes

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Pressing (A) displays the elapsed time
●
from the start of a race up to the point
when you pressed the button (split
time).
D
Start
A
Split
A
Split release
D
Stop
Seconds, 1/100 seconds
Hours, minutes
3.
Press (A) to reset the stopwatch to all
zeros.
10