Setup Utilities and Diagnostics Features
Heading
Option
Password
Password Status
Option
(Continued)
Password Check
Load Default
None
Settings
Save Settings
None
and Exit
Exit Without
None
Savings
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
2.3 Protecting the Software
To protect software from loss or damage, you should keep a backup copy of all system software,
applications, and related files stored on the hard drive. See the operating system or backup utility
documentation for instructions on making backup copies of data files.
2.4 Restoring the Software
The Windows operating system and software can be restored to its original state by using the
Restore Plus! CD. See the Restore Plus! CD for complete instructions on using this feature.
2–8
Shows password status
Allows you to set the password check when the supervisor
password is set up.
• Setup: Password prompt appears when BIOS is executed.
• Always: Password verification is checked every time the
computer boots (default).
Loads the optimal default values for all the setup options.
Saves changes and exits setup.
Allows you to exit setup without saving any changes.
336493-004
Description
Service Reference Guide, d200