Computer Setup (Continued)
Heading
Hardware Monitor
(Continued)
Password Option
Load Default Settings
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup Utility Guide
Option
Chassis FAN Speed
CPU VID
Vccp
+1.5V
+2.5V
+3.3V
+5.0V
+12.0V
HVcc (+3.3VSB)
Change Supervisor
Password
Password Status
Password Check
None
Computer Setup (F10) Utility
Description
Detects current chassis FAN speed
Detects current CPU voltage
Detects current Vccp voltage
Detects current ATX power +1.5V
Detects current ATX power +2.5V
Detects current ATX power +3.3V
Detects current ATX power +5.0V
Detects current ATX power +12.0V
Detects current HVcc voltage
Allows you to set and change the
supervisor password
Shows password status
Allows you to set the password check
when the supervisor password is set up
• Setup: Password prompt appears
when BIOS is executed
• Always: Password verification is
checked every time the computer
boots (Default)
Loads the optimal default values for all of
the setup options
9