Computer Setup (F10) Utility
Computer Setup (Continued)
Heading
Hardware Monitor
(Continued)
Password Option
Load Default Settings
Save Settings and Exit
Exit Without Savings
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
10
Option
HVcc (+3.3VSB)
Change Supervisor
Password
Password Status
Password Check
None
None
None
Description
Detects current HVcc voltage
Allows you to set and change the
supervisor password
Shows password status
Allows you to set the password check
when the supervisor password is set up
• Setup: Password prompt appears
when BIOS is executed
• Always: Password verification is
checked every time the computer
boots (Default)
Loads the optimal default values for all of
the setup options
Saves changes and exits setup.
Allows you to exit setup without saving
any changes
Computer Setup Utility Guide