Attaching The Pedestal (Tower Configuration Only); Choosing A Location - HP c8000 Hardware And Software Setup Manual

Hardware Setup

Attaching the Pedestal (tower configuration only)

Ä

Choosing a Location

1–2
CAUTION: Before operating the HP workstation c8000, you must attach the
pedestal to the base of the system to ensure that the system is stable.
To attach the pedestal:
1. Place the system on its side with the bottom of the chassis at the
edge of a table.
2. Align the pedestal 1 so the D-shaped holes on the pedestal line
up with the U-shaped hooks on the base of the chassis.
3. Slide the pedestal towards the front of the system chassis 2 until
it snaps into place.
Attaching the pedestal
Position the system so that its rear connectors are easily accessible:
If the system is a tower configuration, place the system in an area
with easily accessible power outlets and enough space for the
keyboard, mouse, and any other accessories.
If the system is to be rack-mounted, refer to the mounting
instructions provided with your system.
HP workstation c8000 — Getting Started